Hoppe
68mm UPVC Door Handles (to suit Fullex system), 68mm centre, 215 screws, Lever/Lever in Anodised Silver
- SKU:
- DH-68/215-FUL-L/L-AnoSilver (SL97-120016) (5055621408488)
- UPC:
- 5055621408488
- MPN:
- DH-68/215-FUL-L/L-AnoSilve
- Condition:
- New
- Availability:
- In Stock
- Weight:
- 577.00 Grams
Description
These handles will suit Fullex multipoint locks with 68mm centres, and are manufactured by Hoppe.
This handle type was used widely on the old Anglian double glazing UPVC doors, although this system can be found in other doors.
Colours:
- Available in White, Anodised Gold and Black
- Also in Polished Brass or Polished Chrome
This handle is also available by Fab and Fix in White, Hardex Chrome, Brushed Silver and Hardex Gold - Click here to go to the Fab and Fix 68mm handles page
Measurements
- Distance between screws:215mm
- Handle to barrel centre :68mm
- Handle total length:245mm
- These handles are non-handed so will work on Left or Right handed doors
Contents:
1 x internal handle, 1 x external handle, 1 x spindle and fixing screws, 2 spring cartridges
Care should be taken not to confuse these handles with the Ferco system which has a centre of 70mm.
If you need any help measuring your door handles then take a look at our measuring guide by clicking here
Or call us on 01204 652211 for advice
The modern handles are less chunky than previous models, and you may also find that older handles have a spring system fixed into the handle where they are separate cartridges in newer handles.
The levers are fixed to the backplate and by design are fully reversible. Fixing lugs are supplied on both backplates for a secure fit.
Aluminium lever and backplate
Handle Measuring Guide
Door Handle Measuring Guide
Simple steps to help you choose the Correct Door Handle for your Door
First you need to measure between the centre of the handle (the bit that you pull down) and the centre of the keyhole. If you look at the picture to the left this measurement is referred to as A This size is set so make sure you measure carefully. This size is known as the handle CENTRES or PZ. You will find this size as part of the description of all the door handles on our site.
The next size you need to take is the screw centres (referred to as B). To do this you measure from the centre of the top screw to the centre of the bottom screw (some handles have screws under the handle or over the handle.) Once you have these sizes (write them down) you can browse our site for handles that you need.
To make shopping easier now you are armed with the correct sizes CLICK our very simple Door Handle Calculator below to take you to exactly what you need.
Additional Information
PZ Centre:: |
68mm |
Style: |
Lever Lever |
Colour: |
Silver/Grey |
Distance Between Screws: |
215mm |
Length: |
245mm |
Manufacturer: |
Fullex |
Shipping: |
Delivered for just £3.18 |
3 Reviews
-
Good handles
They were well packed and the handles a good fit
-
Door handle
Needed a replacement for the door handle in our old Anglian conservatory. This is identical to the one that was there before and fits perfectly.
-
Excellent service and product
Very impressed with help that I received with regards to handles and measurements.
Related Products
Related Products
Euro Cylinder Door Barrel (with key at both sides)
Eurospec
Ocean Butt Hinge for UPVC Doors
Ocean
Cream Cleaner for UPVC Frames, 50ml
Siroflex
Split Spindle for UPVC Door Handles
Misc