Ferco
70mm UPVC Door Handles (to suit Ferco system), 70mm centre, 200mm screws, Lever/Lever in Anodised Gold
- SKU:
- DH-70/200-FER-AnoGold (M902870G) (4012789452945)
- UPC:
- 4012789452945
- MPN:
- DH-70/200-FER-AnoGold
- Condition:
- New
- Availability:
- In Stock
- Weight:
- 478.00 Grams
Description
Door handles for the Ferco multipoint locks with 70mm centres found in upvc and aluminium doors.
Colours: Also available in White and Anodised Silver
Measurements
- Distance between screws: 200mm
- Handle to barrel centre: 70mm
- Handle total length: 245mm
- These handles are non-handed so will work on Left or Right handed doors
- Ferco handles use 7mm door spindles
Contents:
1 x internal handle, 1 x external handle, 1 x 7mm spindle and fixing screws,
** Care should be taken not to confuse these handles with the Fullex system which has a centre of 68mm.**
Not sure what door handle you need? Call our friendly team on 01204 652211 for advice
These handles are available with 3 different backplate sizes.
- If your 70mm handles have a screw centre of 180mm click here to go to that page
- If your 70mm handles have a screw centre of 215mm click here to go to that page
Handle Measuring Guide
Door Handle Measuring Guide
Simple steps to help you choose the Correct Door Handle for your Door
First you need to measure between the centre of the handle (the bit that you pull down) and the centre of the keyhole. If you look at the picture to the left this measurement is referred to as A This size is set so make sure you measure carefully. This size is known as the handle CENTRES or PZ. You will find this size as part of the description of all the door handles on our site.
The next size you need to take is the screw centres (referred to as B). To do this you measure from the centre of the top screw to the centre of the bottom screw (some handles have screws under the handle or over the handle.) Once you have these sizes (write them down) you can browse our site for handles that you need.
To make shopping easier now you are armed with the correct sizes CLICK our very simple Door Handle Calculator below to take you to exactly what you need.
Additional Information
PZ Centre:: |
70mm |
Style: |
Lever Lever |
Colour: |
Satin Gold |
Distance Between Screws: |
200mm |
Length: |
205mm |
Manufacturer: |
Hoppe |
Shipping: |
Delivered for just £2.39 |
2 Reviews
-
Slightly difficult to fit as screw grommets did not fit existing holes. Had to redrill holes which I was not expecting. Ok now they are fitted.
As above
-
Good quality at a good price
Easy to fit as all requisite extras supplied.