FERCO 6.35 Multipoint Sprung Door Lock, 4 Roller

Ferco 6.35 Multipoint Door Locks 4 roller.(click here for 2 roller option)

This lock is exactly the same as the door lock referenced 635 on other pages but you may need glasses to see the dot between the 6 and the 35

This Ferco mulitpoint lock will replace any of the older ferco locks with a 35mm backset that you have in your UPVC door at the moment.

There are 2 types of Ferco lock available the Ferco 5.28 and the Ferco 6.35. The number is printed (see picture below) on the front of the face plate along the full length of your door.

This Ferco mulitpoint lock will replace any of the older ferco locks you have in your UPVC door at the moment. Contact us before placing your order if your lock has serrated ends

All the older versions of Ferco systems are no longer manufactured but don't panic.

The Ferco 6.35 locking mechanism will replace any of the older 035, 235, 335, 435, 535 versions, and the Ferco 5.28 will replace the 028, 228, 328 and 4.28 versions.

Older versions may only have 2 rollers where the new ones have 4 rollers. You could leave the 2 extra rollers to run loose, but if you add an extra 2 keeps to your frame this will use the door lock as it should be and give increased security. Extra keeps can be bought on our keeps page

Ferco 635 details

• Centre: 70mm
• Backset: 35mm
• 4 rollers
• 1 Latch
• 7mm door handle spindle

Measurement A is the Centre.This is the distance between the centre of the barrel and the center of the spindle.

Measurement B is the back set. That is the distance from the front of the locking system to the middle of the spindle.

You may need to change the handing of the latch on your new mechanism. We provide these instructions for FREE when you purchase a Ferco 5.28 or Ferco 6.35. The instructions are different for each type - see links below:

Latch instructions for Ferco 5.28

Latch instructions for ferco 6.35