Ferco
FERCO 635 Multipoint Sprung Door Locks, 4 Roller
- SKU:
- MPL-FER635-4roller (G13764/FER35000)
- UPC:
- MPL-FER635-4roller (G13764/FER35
- MPN:
- MPL-FER635-4roller (G13764/FER35000)
- Condition:
- New
- Availability:
- In Stock
- Weight:
- 9,001.00 Grams
Description
Ferco 635 Multipoint Door Locks 4 roller. (click here for 2 roller option)
This Ferco mulitpoint lock will replace any of the older ferco locks you have in your UPVC door at the moment.
There are 2 types of Ferco lock available the Ferco 528 and the Ferco 635. The number is printed (see picture below) on the front of the face plate along the full length of your door.
The Ferco 635 has a 35mm backset. If you need a Ferco 528 with a 28mm backset then click here
This Ferco mulitpoint lock will replace any of the older ferco locks you have in your UPVC door at the moment. Contact us before placing your order if your lock has serrated ends
There are 2 types of lock available the Ferco 528 and the Ferco 635. The number is printed (see picture below) on the front of the face plate along the full length of your door.
All the older versions of Ferco systems are no longer manufactured but don't panic.
The Ferco 635 locking mechanism will replace any of the older 035, 235, 335, 435, 535 versions, and the Ferco 528 will replace the 028, 228, 328 and 428 versions.
Older versions may only have 2 rollers where the new ones have 4 rollers. You could leave the 2 extra rollers to run loose, but if you add an extra 2 keeps to your frame this will use the door lock as it should be and give increased security. Extra keeps can be bought on our keeps page
Ferco 635 details
- Centre: 70mm
- Backset: 35mm
- 4 rollers
- 1 Latch
- 7mm door handle spindle
Measurement A is the Centre.This is the distance between the centre of the barrel and the center of the spindle.
Measurement B is the back set. That is the distance from the front of the locking system to the middle of the spindle.
You may need to change the handing of the latch on your new mechanism. We provide these instructions for FREE when you purchase a Ferco 635.
Simple steps to help you choose the right size backset for your Gearbox
The Backset size is A in the diagram
Measure from the the front of the main faceplate (A in the diagram) to the middle of the spindle hole. This measurement is taken when the gearbox is attached to the main front face plate.
Measurement B is the PZ Centre.
Videos
View AllClose
Additional Information
PZ Centre:: |
70mm |
Backsets available: |
35 mm |
Rollers: |
4 |
Latch: |
Yes |
Deadbolt under Latch: |
No |
Name on front: |
Ferco or GU |
_alsobought: |
16908 |
23 Reviews
-
FERCO 635 Multipoint lock, 4 Roller.
Excellent Service. After my old lock broke after 16 years service I was advised that it would be dificuilt or impossible to get a new lock. So I was pleasantly surprised when I googled FERNCO 635 and found your company. From ordering mid-evening on a Monday, I was advised by you that it was sent with the courier on the Tuesday afternoon, the lock arrived at 2pm on Wednesday and my wife and I had it installed by 2.45pm that day. So I have no hesitation in giving your company 5 stars for service.
-
A good multipoint lock, if it lasts as long as the lock it replaced, 16 years, then I will have no reason for complaint.
Very easy to fit and will last years if serviced regularly.
-
Excellent all round purchase
I plucked this company off the net by googling the lock number. From then on in everything was very smooth, fast and efficient. Product and service first class
-
just what the doctor ordered
I am not a DIY person if I need a job doing I usually get someone to do it for me. Not specifically because I am lazy but because I am disabled and the little jobs around the home are mainly out of my reach. When my door lock decided that it was time to stop working properly and gave up the Holy Ghost I then surfed the Internet and found what I required to replace on your website. After reading all about it I duly ordered it and when it came and I must say delivery was prompt I fitted it myself which took me all of 15 mins. Thankyou for your email on changing the keep over all in all I am highly delighted with the product and your service.
-
Ferco 635
After slight modification to suit the height of my French window, the product works to the degree expected, very good
-
fantastic
fantastic product fantastic delivery simply fantastic
-
Great website and service
Very please i ordered the right lock thanks to the website measurements to go off,easy to fit and fast delivery.Thanks
-
Rehand
I lucky this time was the right handed but great to to have instruction for the future
-
Easy
Nice early deliver, fix in just great happy customer who was told lock would be over £110 pound just for lock. I will use your service again.
Related Products
Related Products
70mm UPVC Door Handles by Schlosser, 70mm centre, 180mm screws, Lever/Lever in Chrome, (to suit Ferco system)
Schlosser Technik
70mm UPVC Door Handles (to suit Ferco system), 70mm centre, 215mm screws, Lever/Lever in White
Hoppe
70mm UPVC Door Handles (to suit Ferco system), 70mm centre, 180mm screws, Lever/Lever in Anodised Gold
Hoppe
70mm UPVC Door Handles (to suit Ferco system), 70mm centre, 200mm screws, Lever/Lever in Anodised Silver
Ferco