Hoppe

Hoppe 48mm UPVC Door Handles, 48mm centre, 215 screws, Lever/Lever in Anodised Silver

Name: Hoppe 48mm UPVC Door Handles, 48mm centre, 215 screws, Lever/Lever in Anodised Silver
Brand: Hoppe
SKU: DH-48/215-HOP-AnoSilver (HOP48LLS) (5055621408419)
Price: 42.42 GBP
Availability: InStock
Rating: 4 (1 reviews)

(1 review) Write a Review

SKU:: DH-48/215-HOP-AnoSilver (HOP48LLS) (5055621408419)
UPC:: 5055621408419
MPN:: DH-48/215-HOP-AnoSilver
Condition:: New
Availability:: In Stock
Weight:: 501.00 Grams

£42.42 Inc. VAT

£35.35 Ex. VAT

Current Stock:

Quantity:

Description
Additional Information
1 Review

Description

Door handles suit multipoint locks with 48mm PZ centres - usually found on aluminium doors.

The range of double glazing handles for the 48mm system has been reduced and these are now the only handles available.

It may mean that you will need to redrill to make the screws suit - care must always be taken to check that the gearbox will not be damaged before drilling into a door.

Also available in White and Anodised Gold. Click here to see the alternative colours

Measurements

Distance between screws: 215mm
Handle to barrel centre: 48mm
Handle total length: 235mm
These handles are non-handed so will work on Left or Right handed doors

Contents:

1 x internal handle, 1 x external handle, 1 x spindle and fixing screws

Not sure what handle you need for your aluminium door?

Call us on 01204 652211or email us on: office@handlesandhinges.co.uk

Handle Measuring Guide

Door Handle Measuring Guide

Simple steps to help you choose the Correct Door Handle for your Door

Firstly you need to measure between the centre of the handle bit that you pull down and the centre of the cylinder. Take a look at the picture to the left and you will see what we mean.

This size is set and you cannot swap different sizes around so make sure you measure carefully. This size is known as the handle CENTRES or PZ. You will find this size as part of the description of all the door handles on our site.

The next size you need to take is the screw centres. To do this you measure from the centre of the top screw to the centre of the bottom screw. Once you have these sizes (write them down) you can browse our site looking for handles that you need.

REMEMBER the centre size is the most important size and CANNOT be changed. If you look at the title of this page you will see that the Centres (pz) and Screw centres make up the description.

View AllClose