How to Measure a Cockspur Window Handle

How To Change A Cockspur Handle

Part 1 : Removal of the window handle

 

  • Step 1. Pull the window into the closed position
  • Step 2.Take out the screws the you can see with the handle in the closed position. The screws may be under a small cover and this can just be flicked out using a small stanley or craft knife. (watch your fingers)
  • Step 3Then put the handle into the open position and take out the remaining screws
  • Step 4 Once the handle is off in your hand you can start taking the measurements that are shown below

 

Measure the correct stack height for your handle:

 

  1. Step 1: Remove the handle from the window & Place the handle base on a flat surface, measure between the flat surface and the underside of the spur.This is marked as "A" in the picture Step 1 Image
     

What Orientation do you need.

 

  1. Step 1: Take a look at the picture and compare your handls to see if you need a Right or Left handed handle. Step 1 Image
     

Click here to see all our cockspur handles