VERSA Inline/Offset Espag 21/Crop 6/M 13FP

VERSA Inline/Offset Espag with 21mm backset and 13mm face plate.

Also available with 16mm faceplate or 25mm backset.

This espag lock is an ideal replacement if you are not sure what length of lock you need for your window or even if its an offset or inline system.
This lock fits all. All you have to do is follow the 2 steps below and you will find a lock to suit. The Versa lock comes longer than you need and there are marks on the mechanism to show you where to chop it down just using a hacksaw!
 PLEASE NOTE: Due to postage contraints this item can only be sent via courier and not through the normal mail. 

Step 1

Measure the distance between the edge of the frame and the middle of the bolts that hold the handle on your window. This will give you the back set, this will be 20mm, 22mm or 25mm. If your backset is 20mm or 22mm then select the 21mm option.

Step 2

Measure the width of the rail and choose that from the drop down box above.

`